• Home
  • Collections
  • Creality CR-30: The 3DPrintMill,Infinite-Z, Belt 3D Printer

Creality CR-30: The 3DPrintMill,Infinite-Z, Belt 3D Printer

An Infinite-Z volume 3D printer created by Naomi Wu Creality3D. Print dimension: 200*170*∞mm | Stable CoreXY Structure | Filament Sensor.

$ 1049.00 USD Final $892 | Code: CR30
6 reviews
Ship From
  • China
  • United Kingdom
  • Czech Republic
  • Canada
  • United States
Please select product attributes before purchasing~~
  • CR 30(3DPrintmill)
This item can't be shipped to this Country/Region
It is expected to arrive within3 daysand will cost£10to ship
0.00 0.00 Final $892 | Code: CR30

Creality 3DPrintMill (CR-30) Belt 3D Printer:

An Infinite-Z volume 3D printer created by Naomi Wu & Creality3D, building on the work of Karl Brown and Bill Steele. 3DPrintMill is a feature of infinite-length printing and bulk printing, thereby time-saving in printing and cost-efficient. The special infinite-Z belt is the first Creality 3D printer to realize infinite build volume in the world.

Infinite-Z-axis for Endless Printing: Equipped with the rolling conveyor belt, it realizes continuous printing. No worries to print the infinite length model. High productivity, time-saving, and cost-efficient (Print dimension: 200*170*∞mm) *A removable extension bracket is available for installing to prevent the model from falling during printing.

Stable CoreXY Structure: The stable and sturdy CoreXY precision structure with isosceles right triangle support gives you an extraordinary printing experience.

Nylon Conveyor Belt: Made of wear-resistant Nylon, the conveyor belt features excellent adhesion to the model. The printed model can fall off automatically as the belt rolls to the end, thus free your hand Strong adhesion| Hassle-free removal | Wear-resistant| Well-balanced conveyance *Easy to replace the conveyor belt.

Dual gears metal extrusion mechanism: High-quality dual gears metal extrusion, combined with the 45 degrees slanting nozzle realizing constant printing of >200 hours without pressure.

Unique 45° Printing Angle: The unique 45 ° angle design offsets the limitations of the vertical nozzle structure. Equipped with a high-performance nozzle kit, it achieves continuous printing along with the horizontal Z-axis.

Filament Breakage Detector: Whenever there is a possible accident like filament run-out or filament breakage, the smart sensor forces the machine to suspend printing. Printing will be automatically resumed after the new filament feed-in.

Ultra-silent Motherboard/Fans to Cool Down Ensure/Resume Printing.

Time Lapse of #3DPrintMill Printed 6-Meter Rod

Creality CR-30 3D PrinterCreality CR-30 3D PrinterCreality CR-30 3D PrinterCreality CR-30 3D PrinterCreality CR-30 3D PrinterCreality CR-30 3D Printer

Video Guide 2
CR 30 leveling tutorial
3D Printing Nerd #3DPrintMill Update! Long Profiles Prints
Maker's Muse Creality CR-30 Review: Long sword(Model Print)
MainboardFirmware, Troubleshooting
Video Guide 1
Creality 3DPrintMill (CR-30): Unboxing, assembled, set up, and first print!
Customer Reviews

Based on6reviews

  • 83%
  • 0%
  • 17%
  • 0%
  • 0%
Write A Review
Ask A Question
Uziel Anaya2021-12-25 04:12:40 VERIFIED
Question: Hello, Will the CR30 print carbon fiber nylon? If not, are there are part available that might help achieve this? Any guidance or recommendations are very much appreciated. Thank you.

Answer: It is not recommended to use high temperature consumables such as PETG/ABS/Nylon, because the belt is recommended to be used in an environment below 80 degrees

Michal Horaczek2021-12-25 04:14:21 VERIFIED
Question: Hello, I have a problem with the adhesion to the belt. I see that adhesion in the central section of the belt (where most of my parts are printed) is much worse than on the sides. Could you advise how to get adhesion of central section of the belt back to it's nominal condition? Is there maybe a cleaning agent which could be used to clean the belt and regain adhesion? If yes, please advise how often cleaning should be performed. Thank you for the feedback in advance.

Answer: 1. Please wipe the surface of the belt with isopropyl alcohol 2. Re-level and adjust the tightness of the belt to ensure that the belt and the hot bed are tightly attached If you have similar questions, please contact us sale@creality3dofficial.com or cs@creality.com

gibbermagash2021-12-25 04:06:08 VERIFIED
Question: What are the outside dimensions of the printer? As in what sized space would it fit into.

Answer: It is about 535*656*410. If you want to add the detachable stand, it will take more space. https://www.creality3dofficial.com/products/creality-splice-bracket-set-for-cr-30

Creality CR-30: The 3DPrintMill,Infinite-Z, Belt 3D Printer
£ 239
Added to the cart